Happy Holidays!


We would like to inform you about our shipping schedule for the 2024 December holiday season.

ATCC will be closed from December 24, 2024 to January 1, 2025. To ensure timely delivery, please submit orders in accordance with the following:


  • Domestic orders no later than December 13th for shipment by December 20, 2024
  • International orders no later than December 11, 2024 for shipment by first week of January 2025

Thank you for your cooperation. We will resume our normal shipping schedule on January 2, 2025.

Contact Us
American Type Culture Collection (ATCC) Logo American Type Culture Collection (ATCC) Logo 0
  • Careers
  • Support

RPTEC/TERT1 OCT2

CRL-4031-OCT2

Explore our data
Product category
Human cells
Product type
hTERT-immortalized cell
Organism
Homo sapiens, human
Morphology
epithelial
Tissue
kidney; Epithelium; Proximal tubule; Renal cortex
Disease
Normal
Applications
3D cell culture
Drug development
High-throughput screening
Toxicology
Product format
Frozen
Storage conditions
Vapor phase of liquid nitrogen
Buy Now
Price: $6,256.00 ea
Discounts may be available for our fellow nonprofit organizations. Login to see your price.

Generally ships within 1-3 business days

Documentation

ATCC determines the biosafety level of a material based on our risk assessment as guided by the current edition of Biosafety in Microbiological and Biomedical Laboratories (BMBL), U.S. Department of Health and Human Services. It is your responsibility to understand the hazards associated with the material per your organization’s policies and procedures as well as any other applicable regulations as enforced by your local or national agencies.

Cells contain SV40 sequences

ATCC highly recommends that appropriate personal protective equipment is always used when handling vials. For cultures that require storage in liquid nitrogen, it is important to note that some vials may leak when submersed in liquid nitrogen and will slowly fill with liquid nitrogen. Upon thawing, the conversion of the liquid nitrogen back to its gas phase may result in the vial exploding or blowing off its cap with dangerous force creating flying debris. Unless necessary, ATCC recommends that these cultures be stored in the vapor phase of liquid nitrogen rather than submersed in liquid nitrogen.

Required Products

These products are vital for the proper use of this item and have been confirmed as effective in supporting functionality. If you use alternative products, the quality and effectiveness of the item may be affected.

Detailed product information

General

Specific applications
kidney drug toxicity screening and research; transport studies

Characteristics

Cells per vial
Approximately 1.0 x 106
Volume
1.0 mL
Growth properties
Adherent
Karyotype
normal diploid; abnormal pseudodiploid; abnormal near-diploid
Comments

RPTEC/TERT1 cell line stably expressing SLC transporter hOCT2(SLC22A2)

  • Marker Testing (ICC) - > 75% positive for OCT2, E-Cadherin, CD13
  • Dome formation – positive, comparable to parental line
  • RT PCR OCT2 Expression Assay – one band at 1.6 kb
  • Telomerase Activities (TRAP Assay) – Positive, > 4 repeats
  • OCT21 copy number confirmed via ddPCR – 5 copies (parental line has 2 copies)

Handling information

Unpacking and storage instructions
  1. Check all containers for leakage or breakage.
  2. Remove the frozen cells from the dry ice packaging and immediately place the cells at a temperature below ­-130°C, preferably in liquid nitrogen vapor, until ready for use.
Complete medium
The base medium for this cell line is DMEM/F-12 (ATCC 30-2006). To make the complete medium add the following components: 

  • hTERT Immortalized RPTEC Growth Kit (ATCC ACS-4007) with Supplement A (5 ml) and Supplement B (8ml)
  • 0.3 µg/mL puromycin
Temperature
37°C
Atmosphere
95% Air, 5% CO2
Handling procedure

To ensure the highest level of viability, thaw the vial and initiate the culture as soon as possible upon receipt. If upon arrival, continued storage of the frozen culture is necessary, it should be stored in liquid nitrogen vapor phase and not at -70°C.  Storage at -70°C will result in loss of viability.  

  1. Initial seeding density is 1x 104 and 2x104 viable cells/cm2. Thaw the vial by gentle agitation in a 37°C water bath. To reduce the possibility of contamination, keep the O-ring and cap out of the water.  Thawing should be rapid (approximately 2 minutes).
  2. Remove the vial from the water bath as soon as the contents are thawed, and decontaminate by dipping in or spraying with 70% ethanol. All of the operations from this point on should be carried out under strict aseptic conditions.
  3. Transfer the vial contents to a centrifuge tube containing  9.0 mL complete culture medium. and spin at approximately 125 x g for 5 to 7 minutes.
  4. Resuspend cell pellet with the recommended complete medium. It is important to avoid excessive alkalinity of the medium during recovery of the cells.  It is suggested that, prior to the addition of the vial contents, the culture vessel containing the complete growth medium be placed into the incubator for at least 15 minutes to allow the medium to reach its normal pH (7.0 to 7.6). pH (7.0 to 7.6).
  5. Incubate the culture at 37°C in a suitable incubator.  A 5% CO2 in air atmosphere is recommended if using the medium described on this product sheet.

         

Subculturing procedure
Volumes used in this protocol are for 75 cm2 flask; proportionally reduce or increase amount of dissociation medium for culture vessels of other sizes. Corning® T-75 flasks (catalog #430641) are recommended for subculturing this product.
  1. Remove and discard culture medium.
  2. Briefly rinse the cell layer with Phosphate Buffered Saline (PBS; ATCC 30-2200) solution to remove all traces of serum that contains trypsin inhibitor.
  3. Add 2.0 to 3.0 mL of Trypsin-EDTA for Primary Cells (ATCC PCS-999-003) to flask and observe cells under an inverted microscope until cell layer is dispersed (usually within 5 to 15 minutes).
    Note: To avoid clumping do not agitate the cells by hitting or shaking the flask while waiting for the cells to detach. Cells that are difficult to detach may be placed at 37°C to facilitate dispersal.
  4. 0.1% Soybean Trypsin Inhibitor (ATCC 30-2104) is then used to neutralize the trypsin. After neutralization, aspirate cells by gently pipetting.
  5. Remove Trypsin Inhibitor via centrifugation.
  6. Resuspend the cells with complete growth medium.
  7. Add appropriate aliquots of the cell suspension to new culture vessels.
    Cultures can be established between 1.0 x 104 and 2.0 x 104 viable cells/cm2.
  8. Incubate cultures at 37°C.
Interval: Maintain cultures at a cell concentration between 1.1X 104 and 1.5 X 105 cell/cm2.
Subcultivation Ratio: A subcultivation ratio of 1:3 to 1:8 is recommended
Medium Renewal: 2 to 3 times per week

Quality control specifications

Bacterial and fungal testing
Not detected
Mycoplasma contamination
Not detected
Virus testing
Cytomegalovirus (CMV): Not detected
Human papillomavirus (HPV): Not detected
Human Immunodeficiency virus (HIV): Not detected
Epstein-Barr virus (EBV): Not detected
Hepatitis B virus (HBV): Not detected
Functional tests
Functionality was validated during product development using both an ASP+ uptake assay and an EAM-1 uptake assay. Cells were seeded on 96 well plate, 24 hours later, different concentrations of Asp+ or EAM-1 were added in the HBSS buffer and incubated at 37°C for 20 minutes; uptake was stopped by washing the wells with ice-cold HBSS, after 4 washes with HBSS, a 100µL of lysate buffer was added to each well. Fluorescence intensity is measured using the Promega GloMax®-Multi Detection System. The uptake ratio for EAM-1 was ≥ 20 and ≥4 for ASP+.
Population doubling time
Approximately 85 hrs
STR profiling
Amelogenin: X,Y
CSF1PO: 11
D13S317: 11,13
D16S539:11,12
D5S818: 9,11
D7S820: 10
THO1: 9,9.3
TPOX: 8,11
vWA: 16,18

History

Depositors
ATCC

Legal disclaimers

Intended use
This product is intended for laboratory research use only. It is not intended for any animal or human therapeutic use, any human or animal consumption, or any diagnostic use.
Warranty

The product is provided 'AS IS' and the viability of ATCC® products is warranted for 30 days from the date of shipment, provided that the customer has stored and handled the product according to the information included on the product information sheet, website, and Certificate of Analysis. For living cultures, ATCC lists the media formulation and reagents that have been found to be effective for the product. While other unspecified media and reagents may also produce satisfactory results, a change in the ATCC and/or depositor-recommended protocols may affect the recovery, growth, and/or function of the product. If an alternative medium formulation or reagent is used, the ATCC warranty for viability is no longer valid.  Except as expressly set forth herein, no other warranties of any kind are provided, express or implied, including, but not limited to, any implied warranties of merchantability, fitness for a particular purpose, manufacture according to cGMP standards, typicality, safety, accuracy, and/or noninfringement.

Disclaimers

This product is intended for laboratory research use only. It is not intended for any animal or human therapeutic use, any human or animal consumption, or any diagnostic use. Any proposed commercial use is prohibited without a license from ATCC.

While ATCC uses reasonable efforts to include accurate and up-to-date information on this product sheet, ATCC makes no warranties or representations as to its accuracy. Citations from scientific literature and patents are provided for informational purposes only. ATCC does not warrant that such information has been confirmed to be accurate or complete and the customer bears the sole responsibility of confirming the accuracy and completeness of any such information.

This product is sent on the condition that the customer is responsible for and assumes all risk and responsibility in connection with the receipt, handling, storage, disposal, and use of the ATCC product including without limitation taking all appropriate safety and handling precautions to minimize health or environmental risk. As a condition of receiving the material, the customer agrees that any activity undertaken with the ATCC product and any progeny or modifications will be conducted in compliance with all applicable laws, regulations, and guidelines. This product is provided 'AS IS' with no representations or warranties whatsoever except as expressly set forth herein and in no event shall ATCC, its parents, subsidiaries, directors, officers, agents, employees, assigns, successors, and affiliates be liable for indirect, special, incidental, or consequential damages of any kind in connection with or arising out of the customer's use of the product. While reasonable effort is made to ensure authenticity and reliability of materials on deposit, ATCC is not liable for damages arising from the misidentification or misrepresentation of such materials.

Please see the material transfer agreement (MTA) for further details regarding the use of this product. The MTA is available at www.atcc.org.

Permits & Restrictions

Material Transfer Agreement Addendum for Screening Applications

For-profit organizations
For every order of this item, you must provide a signed Material Transfer Agreement Addendum for Screening Applications. We cannot ship this item until we receive this addendum. The person signing the addendum as the principal investigator must match the end user as listed on the applicable sales order for the item.

Email the signed addendum to [email protected] with a reference to both your account and sales order numbers. Once received, your addendum will be reviewed, and this item will be released for shipment if all requirements are met. Additional fees may apply if this product is being used for a screening use (ATCC ACS-2103F), and these fees will be applied after your order is confirmed. If you need assistance with your order, please contact our Customer Care team or your applicable distributor.

Import Permit for the State of Hawaii

If shipping to the U.S. state of Hawaii, you must provide either an import permit or documentation stating that an import permit is not required. We cannot ship this item until we receive this documentation. Contact the Hawaii Department of Agriculture (HDOA), Plant Industry Division, Plant Quarantine Branch to determine if an import permit is required.

MORE INFORMATION ABOUT PERMITS AND RESTRICTIONS

Frequently Asked Questions

References

Curated Citations

Wieser M, et al. hTERT alone immortalizes epithelial cells of renal proximal tubules without changing their functional characteristics. Am. J. Physiol. Renal Physiol. 295: 1365-1375, 2008. PubMed: 18715936

Bodnar AG, et al. Extension of life-span by introduction of telomerase into normal human cells. Science 279: 349-352, 1998. PubMed: 9454332

Freshney RI. Culture of Animal Cells: A Manual of Basic Technique, 5th edition. New York: Wiley Liss; 2005. For more information on enzymatic dissociation and subculturing of cell lines see Chapter 13.

For product-related inquiries and issues, contact Technical Service:

Message Us

Hours of Operation

Monday - Friday
9:00am - 5:00pm
US Eastern Time