- Product category
-
Animal cells
- Organism
-
Drosophila melanogaster, fruit fly
- Morphology
- epithelial
- Tissue
- Embryo
- Applications
-
3D cell culture
- Product format
- Frozen
- Storage conditions
-
Vapor phase of liquid nitrogen
Documentation
ATCC determines the biosafety level of a material based on our risk assessment as guided by the current edition of Biosafety in Microbiological and Biomedical Laboratories (BMBL), U.S. Department of Health and Human Services. It is your responsibility to understand the hazards associated with the material per your organization’s policies and procedures as well as any other applicable regulations as enforced by your local or national agencies.
ATCC highly recommends that appropriate personal protective equipment is always used when handling vials. For cultures that require storage in liquid nitrogen, it is important to note that some vials may leak when submersed in liquid nitrogen and will slowly fill with liquid nitrogen. Upon thawing, the conversion of the liquid nitrogen back to its gas phase may result in the vial exploding or blowing off its cap with dangerous force creating flying debris. Unless necessary, ATCC recommends that these cultures be stored in the vapor phase of liquid nitrogen rather than submersed in liquid nitrogen.
Detailed product information
General
- Specific applications
- This cell line is a suitable transfection host.
Characteristics
- Growth properties
- Mixed: suspension with some loosely adherent cells
- Comments
-
The cells have been shown to support the growth of the insect stages of malaria parasites. RefWarburg A, Miller LH. Sporogonic development of a malaria parasite in vitro. Science 255: 448-450, 1992. PubMed: 1734521
Handling information
- Unpacking and storage instructions
-
- Check all containers for leakage or breakage.
- Remove the frozen cells from the dry ice packaging and immediately place the cells at a temperature below -130°C, preferably in liquid nitrogen vapor, until ready for use.
- Complete medium
-
Schneider's Drosophila Medium, 90%; heat-inactivated fetal bovine serum, 10%. NOTE: the fetal bovine serum should be selected for ability to support the growth of insect cell lines.
This medium is formulated for use without CO2.Example media preparation:
- 500 mL Schneider's Drosophila Medium (Gibco catalog # 21720-024)
- 56 mL heat-inactivated, insect tested FBS (Sigma catalog #F4135)
- Temperature
-
23°C (22-24°C)
- Handling procedure
-
To insure the highest level of viability, thaw the vial and initiate the culture as soon as possible upon receipt. If upon arrival, continued storage of the frozen culture is necessary, it should be stored in liquid nitrogen vapor phase and not at -70°C. Storage at -70°C will result in loss of viability.
- Thaw the vial by gentle agitation in a 24°C water bath. To reduce the possibility of contamination, keep the O-ring and cap out of the water. Thawing should be rapid (approximately 2 minutes).
- Remove the vial from the water bath as soon as the contents are thawed, and decontaminate by dipping in or spraying with 70% ethanol. All of the operations from this point on should be carried out under strict aseptic conditions.
- Transfer the vial contents to a 25 cm2 non-vented tissue culture flask and dilute with the recommended complete culture medium (see the lot information on Certificate of Analysis (COA) for the culture recommended dilution ratio).
The recommended seeding density for CRL-1963 is 2.0 x 105 to 4.0 x 105 viable cells/mL.
- Incubate the culture at 24°C in a suitable incubator.
If it is desired that the cryoprotective agent be removed immediately, or that a more concentrated cell suspension be obtained, centrifuge the cell suspension at approximately 280 x g for 10 minutes. Discard the supernatant and resuspend the cells with fresh growth medium at the dilution ratio recommended in the specific batch information.
Note: Cells grow mainly in suspension with minimal loosely attached cells. Treat cell line as a suspension cell line when expanding these cells.
- Subculturing procedure
-
Gently resuspend the cells by pipetting medium across the monolayer or (for larger flasks) by slapping the flask against the base of the palm. Note: Attached cells may be removed by gently banging or tapping the vessels, or by rinsing the growth surface with culture medium. Dilute the cell suspension to the desired concentration with fresh medium. Cultures should be maintained by the addition of fresh medium.
Maintain cultures at a cell concentration between 5 x 104 and 4 x 105 cells/mL.
Subcultivation Ratio: A subcultivation ratio of 1:10 or greater is recommendedMedium Renewal: At the time of subcultivationNote: The cells will grow as a loose monolayer (or in suspension) at any temperature between 16°C and 28°C.
Quality control specifications
- Mycoplasma contamination
- Not detected
- Population doubling time
- Approximately 67 hrs
History
- Deposited as
- Drosophila melanogaster
- Depositors
- IR Schneider
- Patent number
- Schneider's Drosophila Line 2 [D. Mel. (2), SL2] is a cell line exhibiting epithelial-like morphology that was isolated in 1969 from the embryo of a fruit fly. This cell line was deposited IR Schneider.
- Year of origin
- 1969
- Cross references
-
GenBank AF250759 Drosophila melanogaster hexokinase gene, partial cds.
Legal disclaimers
- Intended use
- This product is intended for laboratory research use only. It is not intended for any animal or human therapeutic use, any human or animal consumption, or any diagnostic use.
- Warranty
-
The product is provided 'AS IS' and the viability of ATCC® products is warranted for 30 days from the date of shipment, provided that the customer has stored and handled the product according to the information included on the product information sheet, website, and Certificate of Analysis. For living cultures, ATCC lists the media formulation and reagents that have been found to be effective for the product. While other unspecified media and reagents may also produce satisfactory results, a change in the ATCC and/or depositor-recommended protocols may affect the recovery, growth, and/or function of the product. If an alternative medium formulation or reagent is used, the ATCC warranty for viability is no longer valid. Except as expressly set forth herein, no other warranties of any kind are provided, express or implied, including, but not limited to, any implied warranties of merchantability, fitness for a particular purpose, manufacture according to cGMP standards, typicality, safety, accuracy, and/or noninfringement.
- Disclaimers
-
This product is intended for laboratory research use only. It is not intended for any animal or human therapeutic use, any human or animal consumption, or any diagnostic use. Any proposed commercial use is prohibited without a license from ATCC.
While ATCC uses reasonable efforts to include accurate and up-to-date information on this product sheet, ATCC makes no warranties or representations as to its accuracy. Citations from scientific literature and patents are provided for informational purposes only. ATCC does not warrant that such information has been confirmed to be accurate or complete and the customer bears the sole responsibility of confirming the accuracy and completeness of any such information.
This product is sent on the condition that the customer is responsible for and assumes all risk and responsibility in connection with the receipt, handling, storage, disposal, and use of the ATCC product including without limitation taking all appropriate safety and handling precautions to minimize health or environmental risk. As a condition of receiving the material, the customer agrees that any activity undertaken with the ATCC product and any progeny or modifications will be conducted in compliance with all applicable laws, regulations, and guidelines. This product is provided 'AS IS' with no representations or warranties whatsoever except as expressly set forth herein and in no event shall ATCC, its parents, subsidiaries, directors, officers, agents, employees, assigns, successors, and affiliates be liable for indirect, special, incidental, or consequential damages of any kind in connection with or arising out of the customer's use of the product. While reasonable effort is made to ensure authenticity and reliability of materials on deposit, ATCC is not liable for damages arising from the misidentification or misrepresentation of such materials.
Please see the material transfer agreement (MTA) for further details regarding the use of this product. The MTA is available at www.atcc.org.
Images
Frequently Asked Questions
References
Curated Citations
Warburg A, Miller LH. Sporogonic development of a malaria parasite in vitro. Science 255: 448-450, 1992. PubMed: 1734521
Schneider I. Cell lines derived from late embryonic stages of Drosophila melanogaster. J. Embryol. Exp. Morphol. 27: 353-365, 1972. PubMed: 4625067
This line was established in 1969 by I. Schneider from several hundred 20 to 24 hour embryos.
For product-related inquiries and issues, contact Product Experience:
Hours of Operation
US Eastern Time