- Product category
-
Human cells
- Organism
-
Homo sapiens, human
- Cell type
- T lymphoblast
- Morphology
- lymphoblast
- Tissue
- Peripheral blood
- Disease
-
acute T cell leukemia
- Applications
-
3D cell cultureImmune system disorder researchImmunology
- Product format
- Frozen
- Storage conditions
-
Vapor phase of liquid nitrogen
Documentation
ATCC determines the biosafety level of a material based on our risk assessment as guided by the current edition of Biosafety in Microbiological and Biomedical Laboratories (BMBL), U.S. Department of Health and Human Services. It is your responsibility to understand the hazards associated with the material per your organization’s policies and procedures as well as any other applicable regulations as enforced by your local or national agencies.
ATCC highly recommends that appropriate personal protective equipment is always used when handling vials. For cultures that require storage in liquid nitrogen, it is important to note that some vials may leak when submersed in liquid nitrogen and will slowly fill with liquid nitrogen. Upon thawing, the conversion of the liquid nitrogen back to its gas phase may result in the vial exploding or blowing off its cap with dangerous force creating flying debris. Unless necessary, ATCC recommends that these cultures be stored in the vapor phase of liquid nitrogen rather than submersed in liquid nitrogen.
Detailed product information
General
- Specific applications
-
This cell line is a suitable transfection host.
Characteristics
- Growth properties
- Suspension
- Derivation
-
The Jurkat cell line was established from the peripheral blood of a 14 year old boy by Schneider et al., and was originally designated JM.The line was cloned from cells obtained from Dr. Kendall Smith and are mycoplasma free.This is a clone of the Jurkat-FHCRC cell line, a derivative of the Jurkat cell line.
- Sex
- Male
- Karyotype
- This is a pseudodiploid human cell line. The modal chromosome number is 46, occurring in 74% with polyploidy at 5.3%. The karyotype is 46,XY,-2,-18,del(2) (p21p23),del(18) (p11.2). Most cells had normal X and Y chromosomes.
- Antigen expression
-
CD3; Homo sapiens, expressed
- Genes expressed
- interleukin-2 (interleukin 2, IL-2); CD3
- Expression markers
- T cell antigen receptor, expressed
- Comments
-
Clone E6-1 cells produce large amounts of IL-2 after stimulation with phorbol esters and either lectins or monoclonal antibodies against the T3 antigen (both types of stimulants are needed to induce IL-2 production.
Handling information
- Unpacking and storage instructions
-
- Check all containers for leakage or breakage.
- Remove the frozen cells from the dry ice packaging and immediately place the cells at a temperature below -130°C, preferably in liquid nitrogen vapor, until ready for use.
- Complete medium
-
The base medium for this cell line is ATCC-formulated RPMI-1640 Medium (ATCC 30-2001). To make the complete growth medium, add the following components to the base medium: fetal bovine serum (ATCC 30-2020) to a final concentration of 10%.
Example media preparation:
- 500 mL RPMI-1640 (ATCC 30-2001)
- 56 mL FBS (ATCC 30-2020) – not heat-inactivated
- Temperature
-
37°C
- Atmosphere
-
95% Air, 5% CO2
- Handling procedure
-
To ensure the highest level of viability, thaw the vial and initiate the culture as soon as possible upon receipt. If upon arrival, continued storage of the frozen culture is necessary, it should be stored in liquid nitrogen vapor phase and not at -70°C. Storage at -70°C will result in loss of viability.
- Thaw the vial by gentle agitation in a 37°C water bath. To reduce the possibility of contamination, keep the O-ring and cap out of the water. Thawing should be rapid (approximately 2 minutes).
- Remove the vial from the water bath as soon as the contents are thawed, and decontaminate by dipping in or spraying with 70% ethanol. All of the operations from this point on should be carried out under strict aseptic conditions
- Transfer the vial contents to a centrifuge tube containing 9.0 mL complete culture medium. and spin at approximately 150 to 400 x g for 8 to 12 minutes (200 x g for 8 minutes).
- Resuspend cell pellet with the recommended complete growth medium (see the lot information on Certificate of Analysis (COA) for the culture recommended dilution ratio) and dispense into a 25 cm2 or a 75 cm2 culture flask as recommended on the COA. The recommended seeding density for TIB-152 is 2 x 105 to 4.0 x 105 viable cells/mL. It is important to avoid excessive alkalinity of the medium during recovery of the cells. It is suggested that, prior to the addition of the vial contents, the culture vessel containing the complete growth medium be placed into the incubator for at least 15 minutes to allow the medium to reach its normal pH (7.0 to 7.6).
- Incubate the culture at 37°C in a suitable incubator. A 5% CO2 in air atmosphere is recommended if using the medium described on this product sheet.
- Subculturing procedure
-
Cultures can be maintained by addition or replacement of medium. Note: it is best to add media as directed in the Medium renewal section below in order to produce conditioned medium. Only replace medium if needed.
Alternatively, cultures can be established by centrifugation with subsequent resuspension at 1 x 105 viable cells/mL.
Note: Centrifuging these cells to subculture/replacing medium is not required for every media renewal. It is always important to perform frequent cell counts, at least twice per week, when culturing suspension cell lines. If the proper cell density is not maintained, then suspension cells will suffer. If the cells become too dense then they can deplete the medium and die, and if they are too sparse, they will enter into a lag phase and grow slowly or die. Cell density cannot be be accurately judged by observation. Cells must be counted.
Do not allow the cell density to exceed 3 X 106 cells/mL. Corning® T-75 flasks (catalog #431464) are recommended for subculturing this product.Interval: Maintain cultures at a cell concentration between 1 x 105 and 2 x 106 viable cells/mL.Note: During production, ATCC dilutes cells at the lower end of the recommended concentration during the earlier culturing period.Medium Renewal: Add fresh medium every 2 to 3 days (depending on cell density) - Reagents for cryopreservation
- Complete growth medium supplemented with 5% (v/v) DMSO (ATCC 4-X)
Quality control specifications
- Bacterial and fungal testing
- Not detected
- Mycoplasma contamination
- Not detected
- Population doubling time
- Approximately 48 hrs
- STR profiling
- D3S1358: 15,17 D21S11: 31.2,33.2 D18S51: 13,21 Penta_E: 10,12 Penta_D: 11,13 D5S818: 9 D13S317: 8,12 D7S820: 8,12 D16S539: 11 CSF1PO: 11,12 Amelogenin: X,Y vWA: 18 D8S1179: 13,14 TPOX: 8,10 FGA: 20,21 D19S433: 14,15.2 D2S1338: 19,23 TH01: 6,9.3
History
- Deposited as
- Homo sapiens
- Depositors
- A Weiss
- Special collection
-
Tumor Immunology Bank
Legal disclaimers
- Intended use
- This product is intended for laboratory research use only. It is not intended for any animal or human therapeutic use, any human or animal consumption, or any diagnostic use.
- Warranty
-
The product is provided 'AS IS' and the viability of ATCC® products is warranted for 30 days from the date of shipment, provided that the customer has stored and handled the product according to the information included on the product information sheet, website, and Certificate of Analysis. For living cultures, ATCC lists the media formulation and reagents that have been found to be effective for the product. While other unspecified media and reagents may also produce satisfactory results, a change in the ATCC and/or depositor-recommended protocols may affect the recovery, growth, and/or function of the product. If an alternative medium formulation or reagent is used, the ATCC warranty for viability is no longer valid. Except as expressly set forth herein, no other warranties of any kind are provided, express or implied, including, but not limited to, any implied warranties of merchantability, fitness for a particular purpose, manufacture according to cGMP standards, typicality, safety, accuracy, and/or noninfringement.
- Disclaimers
-
This product is intended for laboratory research use only. It is not intended for any animal or human therapeutic use, any human or animal consumption, or any diagnostic use. Any proposed commercial use is prohibited without a license from ATCC.
While ATCC uses reasonable efforts to include accurate and up-to-date information on this product sheet, ATCC makes no warranties or representations as to its accuracy. Citations from scientific literature and patents are provided for informational purposes only. ATCC does not warrant that such information has been confirmed to be accurate or complete and the customer bears the sole responsibility of confirming the accuracy and completeness of any such information.
This product is sent on the condition that the customer is responsible for and assumes all risk and responsibility in connection with the receipt, handling, storage, disposal, and use of the ATCC product including without limitation taking all appropriate safety and handling precautions to minimize health or environmental risk. As a condition of receiving the material, the customer agrees that any activity undertaken with the ATCC product and any progeny or modifications will be conducted in compliance with all applicable laws, regulations, and guidelines. This product is provided 'AS IS' with no representations or warranties whatsoever except as expressly set forth herein and in no event shall ATCC, its parents, subsidiaries, directors, officers, agents, employees, assigns, successors, and affiliates be liable for indirect, special, incidental, or consequential damages of any kind in connection with or arising out of the customer's use of the product. While reasonable effort is made to ensure authenticity and reliability of materials on deposit, ATCC is not liable for damages arising from the misidentification or misrepresentation of such materials.
Please see the material transfer agreement (MTA) for further details regarding the use of this product. The MTA is available at www.atcc.org.
Images
Frequently Asked Questions
References
Curated Citations
Weiss A, et al. The role of T3 surface molecules in the activation of human T cells: a two-stimulus requirement for IL-2 production reflects events occurring at a pre-translational level. J. Immunol. 133: 123-128, 1984. PubMed: 6327821
Gillis S, Watson J. Biochemical and biological characterization of lymphocyte regulatory molecules. V. Identification of an interleukin 2-producing human leukemia T cell line. J. Exp. Med. 152: 1709-1719, 1980. PubMed: 6778951
Berninghausen O, Leippe M. Necrosis versus apoptosis as the mechanism of target cell death induced by Entamoeba histolytica. Infect. Immun. 65: 3615-3621, 1997. PubMed: 9284127
Churchill MJ, et al. The rev-responsive element negatively regulates human immunodeficiency virus type 1 env mRNA expression in primate cells. J. Virol. 70: 5786-5790, 1996. PubMed: 8709194
Kolanus W, et al. alphaLbeta2 integrin/LFA-1 binding to ICAM-1 induced by cytohesin-1 a cytoplasmic regulatory molecule. Cell 86: 233-242, 1996. PubMed: 8706128
For product-related inquiries and issues, contact Product Experience:
Hours of Operation
US Eastern Time