- Product category
-
Fungi
- Product type
-
Yeast
- Classification
- Fungi, Dikarya, Ascomycota, Saccharomycotina, Pichiomycetes, Serinales, Debaryomycetaceae, Candida
- Type strain
- No
- Product format
- Freeze-dried
Documentation
ATCC determines the biosafety level of a material based on our risk assessment as guided by the current edition of Biosafety in Microbiological and Biomedical Laboratories (BMBL), U.S. Department of Health and Human Services. It is your responsibility to understand the hazards associated with the material per your organization’s policies and procedures as well as any other applicable regulations as enforced by your local or national agencies.
ATCC highly recommends that appropriate personal protective equipment is always used when handling vials. For cultures that require storage in liquid nitrogen, it is important to note that some vials may leak when submersed in liquid nitrogen and will slowly fill with liquid nitrogen. Upon thawing, the conversion of the liquid nitrogen back to its gas phase may result in the vial exploding or blowing off its cap with dangerous force creating flying debris. Unless necessary, ATCC recommends that these cultures be stored in the vapor phase of liquid nitrogen rather than submersed in liquid nitrogen.
Detailed product information
General
- Preceptrol
- No
Characteristics
- Serotype
- A
- Comments
-
cell wall antigenschronic mucocutaneous candidiasis, myositis, and thymomacloning of cDNAs coding for cell surface proteinseffect of digitonin on chitin biosynthesislectin-like adhesion
Handling information
- Medium
- Temperature
-
24°C
- Handling procedure
-
For freeze-dry (lyophilized) ampoules:
1. Open an ampoule according to enclosed instructions.
2. From a single test tube of sterile distilled water (5 to 6 ml), withdraw approximately 0.5 to 1.0 ml with a sterile pipette and apply directly to the pellet. Stir to form a suspension.
3. Aseptically transfer the suspension back into the test tube of sterile distilled water.
4. Let the test tube sit at room temperature (25°C) undisturbed for at least 2 hours; longer (e.g., overnight) rehydration might increase viability of some fungi..
5. Mix the suspension well. Use several drops (or make dilutions if desired) to inoculate recommended solid or liquid medium. Include a control that receives no inoculum.
6. Incubate the inoculum at the propagation conditions recommended.
7. Inspect for growth of the inoculum/strain regularly. The sign of viability is noticeable typically after 1-2 days of incubation. However, the time necessary for significant growth will vary from strain to strain.
- Handling notes
-
No special notes.
Additional, updated information on this product may be available on the ATCC web site at www.atcc.org.
History
- Deposited as
- Candida albicans (Robin) Berkhout, anamorph
- Synonyms
- Monilia pinoyi (Castellani) Castellani et Chalmers; Endomyces albicans (Robin) Vuillemin; Candida claussenii Lodder et Kreger-van Rij, anamorph; Candida stellatoidea (Jones et Martin) Langeron et Guerra, anamorph
- Depositors
- LF Montes
- Cross references
-
GenBank X94994 ornithine decarboxylase geneGenBank AJ250877 adenylate cyclase gene, cyr1GenBank S79004 30 kDa cell surface protein, mRNAGenBank U89676 putative membrane protein (CSP37) gene, completeGenBank U83997 fibrinogen binding protein mRNA, partial coding sequenceGenBank U86341 prolyl-tRNA synthetase (PRSCa) gene, complete coding sequenceGenBank Y12589 mRNA for phenylalanyl-tRNA synthetase, complete coding sequenceGenBank X66467 SEC18 geneGenBank Y11434 mRNA for YST protein
Legal disclaimers
- Intended use
- This product is intended for laboratory research use only. It is not intended for any animal or human therapeutic use, any human or animal consumption, or any diagnostic use.
- Warranty
-
The product is provided 'AS IS' and the viability of ATCC® products is warranted for 30 days from the date of shipment, provided that the customer has stored and handled the product according to the information included on the product information sheet, website, and Certificate of Analysis. For living cultures, ATCC lists the media formulation and reagents that have been found to be effective for the product. While other unspecified media and reagents may also produce satisfactory results, a change in the ATCC and/or depositor-recommended protocols may affect the recovery, growth, and/or function of the product. If an alternative medium formulation or reagent is used, the ATCC warranty for viability is no longer valid. Except as expressly set forth herein, no other warranties of any kind are provided, express or implied, including, but not limited to, any implied warranties of merchantability, fitness for a particular purpose, manufacture according to cGMP standards, typicality, safety, accuracy, and/or noninfringement.
- Disclaimers
-
This product is intended for laboratory research use only. It is not intended for any animal or human therapeutic use, any human or animal consumption, or any diagnostic use. Any proposed commercial use is prohibited without a license from ATCC.
While ATCC uses reasonable efforts to include accurate and up-to-date information on this product sheet, ATCC makes no warranties or representations as to its accuracy. Citations from scientific literature and patents are provided for informational purposes only. ATCC does not warrant that such information has been confirmed to be accurate or complete and the customer bears the sole responsibility of confirming the accuracy and completeness of any such information.
This product is sent on the condition that the customer is responsible for and assumes all risk and responsibility in connection with the receipt, handling, storage, disposal, and use of the ATCC product including without limitation taking all appropriate safety and handling precautions to minimize health or environmental risk. As a condition of receiving the material, the customer agrees that any activity undertaken with the ATCC product and any progeny or modifications will be conducted in compliance with all applicable laws, regulations, and guidelines. This product is provided 'AS IS' with no representations or warranties whatsoever except as expressly set forth herein and in no event shall ATCC, its parents, subsidiaries, directors, officers, agents, employees, assigns, successors, and affiliates be liable for indirect, special, incidental, or consequential damages of any kind in connection with or arising out of the customer's use of the product. While reasonable effort is made to ensure authenticity and reliability of materials on deposit, ATCC is not liable for damages arising from the misidentification or misrepresentation of such materials.
Please see the material transfer agreement (MTA) for further details regarding the use of this product. The MTA is available at www.atcc.org.
Frequently Asked Questions
References
Curated Citations
Nieto A, et al. Cloning and characterization of the SEC18 gene from Candida albicans. Yeast 9: 875-887, 1993. PubMed: 8212895
Gozalbo D, et al. Effect of digitonin on membrane-bound and chitosomal chitin synthetase activity in protoplasts from yeast cells of Candida albicans. Antonie van Leeuwenhoek 64: 67-74, 1993. PubMed: 8274004
Sentandreu M, et al. Cloning of cDNAs coding for Candida albicans cell surface proteins. J. Med. Vet. Mycol. 33: 105-111, 1995. PubMed: 7658300
Sanjuan R, et al. Identification of glucan-mannoprotein complexes in the cell wall of Candida albicans using a monoclonal antibody that reacts with a (1,6)- beta-glucan epitope. Microbiology 141: 1545-1551, 1995. PubMed: 7551022
Montes LF, et al. Chronic mucocutaneous candidiasis, myositis, and thymoma. A new triad. JAMA 222: 1619-1623, 1972. PubMed: 4564702
For product-related inquiries and issues, contact Product Experience:
Hours of Operation
US Eastern Time